Pin-hole inspection System | APIS-4000B
The APIS-4000B ranks minute pinholes by size with high accuracy (3 ranks: S, M, L) and counts the number of each rank. It can be executed on a high speed line of 1000m/min.
The operation unit is equipped with a large touch panel that puts operability first, and all operations can be performed with a single touch. APIS-4000B/01 is used for the signal processing board,
The number of sensor channels that can be connected is 2 channels/1 board (up to 4 channels/2 boards possible).
Despite the simple signal processing, the detection accuracy is as good as the “APIS-4000F”, and it is possible to output a warning output by rank when a pinhole occurs.
APIS-4000B equipped with basic functions is suitable for aluminum foil inspection for lithium-ion batteries, which has been increasing in recent years, based on aluminum foil, copper foil, steel plate, and rubber plate, just like “APIS-4000F”.
APIS-4000B Screen
Main Menu Screen
Setting Screen
Inspection Screen
APIS-4000B isn’t equipped with an information management, but a linear stop is suitable for the manufacturing line a pinhole isn’t supposed to match using a pinhole detection signal.
(The screen will be in English.)
Functional table
| MODEL | APIS-4000B |
|---|---|
| The minimum detection size | 10μmφ *notes1 |
| Maximum CH number | 2CH(Expansion up to 4CH allowed) |
| Rank setup | 3 rank |
| Sampling unit length | – |
| Map length | – |
| Waveform monitor | – |
| OS | Large-size touch panel *notes2 |
| USB port | – |
| LAN port | – |
【notes1】
Although the minimum pinhole detection size capability of equipment is 10micrometerphi, I may change it under the influence of disturbance etc. I may change with the minimum and the maximum detection pinhole size (range).
【notes2】
I may change OS-CPU by a maker’s renewal of a model, etc.
