Pin-hole inspection System | APIS-4000F
The APIS-4000F ranks minute pinholes by size with high precision (SS, S, M, L, LL, SK, GP) and counts the number of each rank. It can be executed on a high speed line of 1000m/min.
Signal processing boards APIS-4000FS, APIS-4000FC, and APIS-4000MB are used for signal processing, and these boards realize signal processing that does not impair the linearity of the sensor. In particular, by increasing the number of APIS-4000FS, the number of connectable channels is 12ch.
In the information processing section, important data is protected by a highly reliable industrial PC and RAID mirroring, and data can be accumulated by a large-capacity HDD.
In addition, the dedicated software APIS-4000F supports English and Korean in addition to Japanese, and the screen can be converted to English and Korean with a single click.
Fully equipped with these functions, the APIS-4000F is suitable for inspection of aluminum foil, copper foil, steel plate, rubber plate, and aluminum foil for lithium-ion batteries, which have been increasing in recent years.
APIS-4000F Screen
APIS-4000F and the information management is also rich and the unit chief and according to the rank are equipped with various information management modes.
Calibration is also performed using a highly precise standard pinhole about calibration.
・Condition registration of more than 100 is possible by check condition setting.
・A sensitivity adjustment every each channel is possible, and it’s possible to make disregard lavel of cross-machine direction become stable by this.
Even if ameasuring instrument of an oscilloscope is not, calibration is possible to use the signal monitor function.
Functional table
| MODEL | APIS-4000F |
|---|---|
| The minimum detection size | 10μmφ *notes1 |
| Maximum CH number | 12CH |
| Rank setup | 5rank＋（SK・GP） |
| Sampling unit length | 10m unit |
| Map length | 1m unit setup (off-mode) |
| Waveform monitor | A sampling period variable |
| OS | Windows *notes2 |
| USB port | Yes |
| LAN port | Yes |
【notes1】
Although the minimum pinhole detection size capability of equipment is 10micrometerphi, I may change it under the influence of disturbance etc. I may change with the minimum and the maximum detection pinhole size (range).
【notes2】
I may change OS-CPU by a maker’s renewal of a model, etc.
